1/4" OD Natural x 3/8" OD Natural
Pneumatic Bonded Poly Tubing, HDPE

ESP's Intermittent or skip Bonded tubing is a two-tube bonded configuration. 

The durable and lightweight properties all make bonded tubing an ideal choice for a wide spectrum of uses including environmental water sampling, well testing, remediation, and monitoring equipment. ESP's Bonded tubing is the leading choice for bladder pump sample tubing.

What is a skip-bond? A: The bond between the two tubes runs every other 6". This means there is a 6" gap between the bond lines where no bond has taken place. This reduces the need for separation or splitting back the tubes wherever a cut is needed. by using the skip section of tubing, you ensure a tight seal between compression fittings because there will not be any weld residue in that section.

For questions about bulk orders, please call us at 888-511-4377

Specifications:

Tubing A:
Tubing Material: Polyethylene
Tubing Type: High Density / HDPE
Tubing Color: NATURAL
Inside Diameter: .25" or 1/4"
Outside Diameter: .375" or 3/8"
Wall Thickness: .062"
Length: 500'
Max Pressure: 214  PSI at 72°F
Temp Range: -93°F - +184°F
Hardness, Shore D: 50
Tensile Strength: 1700 PSI 

Tubing B:
Tubing Material: Polyethylene
Tubing Type: High Density / HDPE
Tubing Color: NATURAL
Inside Diameter: .17" or 11/64"
Outside Diameter: .25" or 1/4"
Wall Thickness: .040"
Length: 500'
Max Pressure: 135 PSI at 72°F
Temp Range: -93°F - +184°F
Hardness, Shore D: 50
Tensile Strength: 1700 PSI

Applications:

• Groundwater monitoring
• Bladder pump sampling
• Nested vapor lines
• Air sampling tubes
• Laboratory applications
• Water processing