Search

Categories

  • SS Vapor Pin ® Contractor Kit
  • SS Vapor Pin ® Contractor Kit in Case

click on thumbnail to zoom
Other products by Vapor Pin
Item #: VP-SS-CK
Our Price: $860.00
Quantity:

Description 

This Vapor Pin ® Contractor kit includes all you need to install flush or surface mounted sub-slab sampling systems with the exception of drilling equipment. The kit includes 10 complete Stainless Steel Vapor Pins ® with extra sleeves and protective caps, along with secure covers and accessories like the Installation/Extraction Tool, drill guide, and bottle brush. This all comes in an easy-to-manage hard plastic case.

The system connects to ¼-inch sample tubing with softer tubing, preferably Clear Vinyl Tygon or Silicone Tubing. Stainless Steel is more durable and resistant to corrosion than brass. For this reason, stainless steel is the best option for long-term installations and in corrosive environments. Stainless steel can be reused repeatedly with proper care. We recommend brass Vapor Pins for short-term installations, especially those installed in the stick-up configuration.

For questions about this product or others, please call us at 888-511-4377

Specifications:

Material: Stainless Steel
Upper Barb: 1/4" ID Tubing
Lower Thread:
For Extensions

Includes:

10 - SS Vapor Pin ®
10 - SS Secure Cover
20 - Silicone Sleeves
20 - Protective Caps
1 - SS Drill Guide
1 - Install/Extract tool
1 - Spanner Screwdriver
1 - Bottle Brush
1 - Water Dam
1 - Hard Case

Applications:

The Vapor Pin ® was specifically designed to collect soil gas for sub-slab vapor-intrusion assessments. By sampling the soil gas directly beneath the building's floor, the Vapor Pin System provides the most accurate risk assessment of vapor-intrusion. Sub-slab gas most closely represents the indoor air contamination without indoor or outdoor air quality factors. The convenience of the close-to-surface location makes sampling from these sites easier to collect using hand-held equipment.

The Vapor Pin's compact design makes it possible for a single technician to install and sample. Vapor Pins ® are installed by drilling 5/8-inch holes through the floor with a hammer drill. For Flush mount solutions, the Vapor Pin Secure Cover can be installed with a 1-12" hammer drill.

After installing the Vapor Pin and allowing soil gas to equilibrate for two hours or more, connect the Summa canister, Tedlar bag, or another sample container to the Vapor Pin ®, purge the dead space in the sample train, and collect the sample.

SOP and other Resources:

PDF Standard Operating Procedure

 

Vapor Pin DrawingVapor Pin Drawing 2

 

 

 

 

  NOTE: ESP is only allowed to distribute Vapor Pin inside the US and its territories. For international orders, please refer to the Vapor Pin Distributor page. 

Reviews

Be the first to submit a review on this product!
Review and Rate this Item

Other Items In This Category

Share