Search

Categories

Other products by Vapor Pin
Item #: VP-DGSU
Our Price: $130.00
Quantity:

Description 

Ensure's your 5/8-inch (16 mm) hole is drilled properly. Highly recommended for Mini-Vapor Pin® sampling device installation.    Ensure's your 5/8-inch (16 mm) hole is drilled properly. Highly recommended for Mini-Vapor Pin® sampling device installation. Drill a 5/8-inch (16mm) diameter hole through the slab and approximately 1-inch (25mm) into the underlying soil to form a void. Hole must be 5/8-inch (16mm) in diameter to ensure a seal. When installing the Mini-Vapor Pin® sampling device, the drilled hole must be perpendicular to the slab for the mandatory Secure Cover to seat correctly. It is strongly recommended that the Stick-Up Vapor Pin® drilling guide be used for this purpose.



For questions about this product or others, please call us at 888-511-4377

Specifications:

Material: Steel
Hole ID:
5/8"

SOP and other Resources:

PDF Vapor Pin SOP
PDF Drill Guide and SOP

 

 

 

Vapor Pin Installation

 

 

 

 

 

  NOTE: ESP is only allowed to distribute Vapor Pin inside the US and its territories. For international orders, please refer to the Vapor Pin Distributor page. 

Reviews

Be the first to submit a review on this product!
Review and Rate this Item

Other Items In This Category

Share